product

Because the greenhouse is a relatively closed space, sometimes it is easy to produce high temperature and insufficient humidity during the planting process, resulting in crop dehydration, drying, growth delay and other problems, so that farmers' economic benefits are lost to a certain extent. Therefore, the greenhouse needs to be humidified to meet the requirements of crop growth, such as new cutting crops, new grafted seedlings need high humidity environment; In winter, the relative humidity of the greenhouse air in the hot-air heating system is too low, and it also needs to be humidified. The most common humidification method is high-pressure mist humidification, the basic principle is to atomize water into water mist under high pressure, the water mist produced by this equipment is delicate, the particles are very small, the water mist floats in the air and quickly evaporates, thereby increasing the air humidity. This high-pressure spray system will not produce water, causing secondary pollution affecting the growth of crops. Our spray humidification system comes with water tank, only need household water pressure (2-3 kg), water mist fine particles small, will not cause ground water, will not affect the normal production operations. People directly under the nozzle may feel a little wet. It is best to place the spray nozzle at least 3 meters above the ground or higher, with about 4 meters between each pipe run for optimal efficiency. At the same time, double or single nozzle downward spray is selected, the water mist is delicate, and the water mist will quickly evaporate in the process of falling to increase the humidity in the air. he high-pressure spray system has a fully automatic function, can freely set the working time, when the water supply equipment stops and no staff guards the case, the equipment will automatically shut down, so as to avoid damage caused by idling equipment.